How does the first assistant camera focus if the director is pointing the camera?

How does the first assistant camera focus if the director is pointing the camera? - Grayscale Photo of Group of People in Recording Session

On a film crew there is often a "first assistant camera" whose job it is to focus the camera, which is complex because the subject could be moving or changing, so the focus must be adjusted constantly.

I don't understand how this is possible if the director is pointing the camera and composing the shot. Does it go without saying that whenever the 1AC is working the camera he is both aiming it AND focusing it, or is there some kind of system whereby one person can aim the camera and a different person focus it?



Best Answer

Does it go without saying that whenever the 1AC is working the camera he is both aiming it AND focusing it, or is there some kind of system whereby one person can aim the camera and a different person focus it?

It's essentially a two person job...a Camera Operator and a 1st AC (Focus Puller in old terminology).

The camera operator is responsible for physically operating the camera and maintaining composition and camera angles throughout a given scene or shot.

Wikipedia

The operator points the camera as indicated and desired by the director and the 1st AC maintains the focus despite changing angles and close-ups.

A focus puller, or 1st assistant camera, is a member of a film crew's camera department whose primary responsibility is to maintain image sharpness on whatever subject or action is being filmed.

enter image description here

"Pulling focus" or "rack focusing" refers to the act of changing the lens's focus distance setting in correspondence to a moving subject's physical distance from the focal plane. For example, if an actor moves from 8m to 3m away from the focal plane within a shot, the focus puller will change the distance setting on the lens during the take in precise relation to the changing position of the actor. Additionally, the focus puller may shift focus from one subject to another within the frame, as dictated by the specific requirements of the shot.

Wikipedia

The Focus Puller is unlikely to replaced by technology soon but new technologies and devices are likely to make the job somewhat easier.

Traditionally, the focus puller used only his marks and his own well-developed sense of distance estimation to achieve good results. Over the last decade, the increased use of digital cameras, higher-resolution video taps and/or on-camera monitors have provided focus pullers with additional tools to help maintain proper focus. A high-definition monitor can be particularly useful when a fast-paced production simply does not allow time for the focus puller to set and check all marks that may be needed, or if no rehearsal will be provided.

@Tetsujin notes from the comments

...the poor focus-puller doesn't have to run round hanging off the end of the lens any more, he can use one of these & remote monitor the focus

enter image description here enter image description here




Pictures about "How does the first assistant camera focus if the director is pointing the camera?"

How does the first assistant camera focus if the director is pointing the camera? - Serious female office worker using printer in workplace
How does the first assistant camera focus if the director is pointing the camera? - Man Recording Video
How does the first assistant camera focus if the director is pointing the camera? - Positive black businessman leaning on railing near modern business center



What are the responsibilities of a camera assistant?

The Camera Assistant supports the principal Camera Operator and operators of any additional cameras. This involves the preparation, checking and packing of all camera equipment prior to a shoot, and its deployment on location. The Camera Assistant is also responsible for all consumables such as batteries.

What does the first assistant camera do?

The first assistant camera (also called the 1st assistant camera, 1st AC, first AC, or focus puller) has one main job: they sit next to the camera during filming and operate the lens's focusing ring. The role of the focus puller is to keep the right subject in focus throughout each scene.

How do you pull focus as first AC?

Of the various types of camera focus in film, the tilt shift is perhaps the most radical. Normally, a camera lens is aligned directly with the camera's sensor. With a tilt shift lens, the lens can be either tilted vertically or shifted horizontally in relation to the sensor.



Tips to be a Good 1st AC




Sources: Stack Exchange - This article follows the attribution requirements of Stack Exchange and is licensed under CC BY-SA 3.0.

Images: Pixabay, Andrea Piacquadio, Kyle Loftus, Ono Kosuki